RTcom Radio Modems Bedienungsanleitung PDF herunterladen (Seite 50)

Page 50

501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA l +1 360 859 1780

Note that there is only one Block List and one Allow List per gateway. The stand-alone modem capability does not maintain a

unique Allow and Block List for each individual LAN device. Some additional exibility however is available when your SmartRG

gateway is under management of Cisco Prime Home™. Refer to Cisco documentation regarding, “Content Filtering” for instruc-

tions.

The individual elds on this screen are dened as follows:

Field Name Description

URL Address URL address to be added to the enabled applicable Exclude or Include list.

Port Number Port number associated with URL being added (default 80 ).

Quality of Service

QOS enables prioritization of internet content to help ensure the best possible performance. This is particularly useful for stream-

ing video and audio content to minimized potential for drop-outs. QoS becomes signicant when the sum of the trac (audio,

video, data) exceeds the capacity of the line.

QoS Config

Use the QOS Cong screen to enable QOS and set the DSCP Mark classication.

Note:

- In ATM mode, the maximum queues that can be congured is 16.

- In PTM mode, the maximum queues that can be congured is 8.

- For each Ethernet interface, the maximum congurable queues is 4.

- Queues for Wireless (e.g. WMM Voice Priority for wl0 interface) show only when wireless is enabled. If the WMM

Advertise function in the Wireless Basic Setup page is disabled, classication related to wireless will have no effect.

After selecting Advanced Setup -> Quality Of Service -> QoS Cong, click the checkbox toward the center of the screen if you wish

to enable QoS.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 116 117

Keine Kommentare

RTcom Radio Modems Bedienungsanleitung Seite 50