
ABACOM Technologies • 32 Blair Athol Crescent • Etobicoke • ON • M9A 1X5 • Tel +416-236-3858 • Fax +416-236-8866
1CH-4xx-HTLP FM Receiver Module Low Power Platform
The 1CH-418/433-HTLP is a low power radio receiver platform designed to accommodate the SILRX range of
receiver modules and to operate in conjunction with a transmitter design employing the TXM series FM trans-
mitter module, together with the Holtek HT-12-E encoder IC. The unit has been specifically designed to oper-
ate at very low current levels, permitting its retro-fit to any system without the need for increased power sup-
ply capacity. Alternatively the receiver may be operated for considerable periods from batteries.
Three versions are available providing operation from 9, 12 or 24V dc supplies. High voltage operation from
supplies above 24V is also possible as the receivers low current consumption permits excess voltage to be
simply dropped using a series connected Zener diodes. The alarm output is fully isolated via a 125Vac 0.5A
output relay with normally open contact.
The receiver platform is supplied in compact PCB format, with both power and alarm LED's. Received data is
decoded using the Holtek HT-12-D. Address bits A0 to A3 are switch programmable and bits A4-A7 may be
drill programmed to give the full 256 code combinations.
Applications include nurse call systems, panic attack alarms, lone worker systems and remote control sys-
tems.
SUPPLY VOLTAGE 10-14Vdc
STANDBY CURRENT120mA
PEAK CURRENT 13mA
DIMENSIONS 65 x 35 x 15mm
MOUNTING HOLES 3.5mm Diameter
DECODER HT-12D
ADDRESSES 16: DIP Switch Coded
256: DIP and Drill Coded
POWER LED Standby: Blinks
Full Power: ON
TX batt. low: OFF
OUTPUT LED Red : o/p active ON
RECEIVER OPTIONSSILRX- 403/418/433MHz
RELAY RATING 125Vac 0.5A
Note: The 1CH-4xx-HTLP platform is supplied without the SILRX FM receiver module.
The receiver module of the chosen frequency must be ordered seperately.
Kommentare zu diesen Handbüchern